Order Products : sales@su-jiao.com
Borcell™ HE1344
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Borcell™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WmgYwl_Borcell-HE1344.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Borcell HE1344 . It is a fully formulated compound for chemical foamed data cable insulation. Borcell 1344 is a high-density polyethylene compound containing chemical blowing agent. Borcell HE1344 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | ISO 1183 | ||
| -- 1 | 0.945 | g/cm³ | ISO 1183 |
| -- 2 | 0.943 | g/cm³ | ISO 1183 |
| Apparent Density | 0.50 - 0.60 | g/cm³ |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| Yield 3 | 13.0 | MPa | IEC 60811-1-1 |
| Yield | 23.0 | MPa | ISO 527-2/50 |
| Tensile Strain | |||
| Fracture 4 | 500 | % | IEC 60811-1-1 |
| Fracture | 600 | % | ISO 527-2/50 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxidation Induction Time (200°C) | 50 | min | IEC 60811-4-2/B |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Resistance to Thermal Ageing (41°C) | 2.1 | month | IEC 60811-4-2/A |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (1 MHz) | 2.33 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 4.0E-4 | IEC 60250 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 - 140 | °C | |
| Cylinder Zone 1 Temp. | 155 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 185 | °C | |
| Cylinder Zone 4 Temp. | 195 | °C | |
| Adapter Temperature | 195 | °C | |
| Melt Temperature | 195 - 200 | °C | |
| Die Temperature | 195 | °C |
| Extrusion instructions |
|---|
| Conductor preheating: 110 to 140°CCooling water: 50°C |
| Note Message | |
|---|---|
| 1 . | Compound, ISO 1872-2 |
| 2 . | Base resin, ISO 1872-2 |
| 3 . | 50 mm/min |
| 4 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P1845 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Somos® 9420 | DSM Somos® | Unspecified | Somos® |
| THERMOLAST® K TF5PEN (Series: FC/AD/PE) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Eltex® B6921/20N2010 | INEOS Olefins & Polymers Europe | HDPE | Eltex® |
| HANWHA KCM-12 | Hanwha Chemical | PVC, Unspecified | HANWHA |
