Order Products : sales@su-jiao.com
RTP 299 F X 125585 H
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WmH5ra_RTP299FX125585H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Flame Retardant - Halogen Free |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.5 - 2.0 | % | ASTM D955 |
| Moisture Content | 0.10 | % |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Ignition Resistance - Aerospace Value (2.03 mm) | 2.00 | FAR 25.853 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2410 | MPa | ASTM D638 |
| Tensile Strength | 37.9 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | > 10 | % | ASTM D638 |
| Flexural Modulus | 2280 | MPa | ASTM D790 |
| Flexural Strength | 68.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 53 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.20 mm) | 530 | J/m | ASTM D4812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79 | °C | |
| Drying Time | 4.0 | hr | |
| Dew Point | -40 | °C | |
| Processing (Melt) Temp | 221 - 274 | °C | |
| Mold Temperature | 66 - 104 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 66 MI LS | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Cheng Yu IPS600 | Cheng Yu Plastic Company Limited | PS (HIPS) | Cheng Yu |
| Fainplast PVC GSK 61 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| DURACON® AW-01 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer+PE | DURACON® |
| COPYLENE® CM010G | Phillips 66 | PP Impact Copolymer | COPYLENE® |
