Order Products : sales@su-jiao.com
KEBAFLEX® P D72.1
| Category: | TPC-ET , Thermoplastic Copolyester Elastomer |
| Manufacturer: | BARLOG plastics GmbH |
| Trademark: | KEBAFLEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WieU90_KEBAFLEX-P-D72-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyester-Elastomer, Shore D75 |
| General Information | |
|---|---|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.27 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 1.7 | % | |
| Flow | 1.6 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 39.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 400 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 16 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 148 | °C | ISO 75-2/B |
| Melting Temperature 1 | 218 | °C | ISO 11357-3 |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sanren I180E (On-spec.) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| tefabloc® TP SD 300 80A | Mitsubishi Chemical Performance Polymers, Inc. | TPE | tefabloc® |
| Spartech Polycom PE4325 | Spartech Polycom | HDPE, HMW | Spartech |
| U-polymer LM-8503-10 | UNITIKA Plastics Division | Polyarylate | U-polymer |
| Bergadur™ PB40 G10 NC007 | PolyOne Corporation | PBT | Bergadur™ |
