Order Products : sales@su-jiao.com
DOW™ MDPE NG6895
| Category: | MDPE , Medium Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ MDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WgPaVO_DOW-MDPE-NG6895.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DOW™ MDPE NG6895 is a Medium Density Polyethylene Resin material. It is available in Latin America. Important attributes of DOW™ MDPE NG6895 are:
Typical application of DOW™ MDPE NG6895: Food Contact Applications |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.939 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/21.6 kg | 11 | g/10 min | |
| 190°C/5.0 kg | 0.38 | g/10 min | |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 50°C, 10% Igepal, F0 | > 2000 | hr | |
| 50°C, 10% Igepal, F50 | > 3000 | hr |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 63 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (2.00 mm) | 800 | MPa | ASTM D790 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 2000 | µm | |
| Tensile Strength - MD | ASTM D882 | ||
| Yield, 2000 µm | 19.0 | MPa | |
| Break, 2000 µm | 30.0 | MPa | |
| Tensile Elongation - MD (Break) | > 800 | % | ASTM D882 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 82 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 118 | °C | ASTM D1525 |
| Oxidation Induction Time (200°C) | > 110 | min | ASTM D3895 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 165 | °C | |
| Cylinder Zone 2 Temp. | 185 | °C | |
| Cylinder Zone 3 Temp. | 200 | °C | |
| Cylinder Zone 4 Temp. | 205 | °C | |
| Melt Temperature | 200 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POPELEN JHC-374 | Lotte Chemical Corporation | PP Impact Copolymer | POPELEN |
| Tecnoprene® AK6HI NAT001 | SO.F.TER. SPA | PP Homopolymer | Tecnoprene® |
| COSMOTHENE® F210 | TPC, The Polyolefin Company (Singapore) Pte Ltd | LDPE | COSMOTHENE® |
| Kepital® FC2020H | Korea Engineering Plastics Co., Ltd | Acetal (POM) Copolymer | Kepital® |
| 3M™ Dyneon™ PTFE Compound TF 8465 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
