Order Products : sales@su-jiao.com
Tekucom SC GF 30 C
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | TEKUMA Kunststoff GmbH |
| Trademark: | Tekucom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WfuAoG_Tekucom-SC-GF-30-C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Tekucom SC GF 30 C is a Polypropylene material filled with 30% glass fiber. It is available in Europe. Primary attribute of Tekucom SC GF 30 C: Flame Rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (250°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Water Absorption (23°C, 24 hr) | 0.10 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 112 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 90.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 6000 | MPa | ASTM D790 |
| Flexural Strength | 140 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, 3.20 mm | 75 | J/m | |
| 0°C, 3.20 mm | 95 | J/m | |
| 23°C, 3.20 mm | 120 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 160 | °C | |
| 1.8 MPa, Unannealed | 152 | °C | |
| Vicat Softening Temperature | |||
| -- | 161 | °C | ASTM D1525 1 |
| -- | 140 | °C | ISO 306/B120 |
| Thermal Conductivity | 0.25 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Electric Strength | 40 to 80 | kV/mm | IEC 60243-1 |
| Dielectric Constant (1 MHz) | 2.30 | IEC 60250 | |
| Dissipation Factor | 1.0E-3 to 1.5E-3 | IEC 60250 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | HB | ||
| 3.20 mm | HB | ||
| Glow Wire Ignition Temperature | 650 | °C | IEC 60695-2-13 |
| Note Message | |
|---|---|
| 1 . | Rate A (50°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shinko-Lac® ASA TA-35 | Mitsubishi Rayon America Inc. | ASA+PC | Shinko-Lac® |
| SUSTAMID 66 GF 30 | Röchling Sustaplast SE & Co. KG | Nylon 66 | SUSTAMID |
| Tarflen® SM-G20 | Grupa Azoty S.A. | PTFE | Tarflen® |
| Thermx® TE4005 | Celanese Corporation | PCT | Thermx® |
| Koblend® P 477E | Versalis S.p.A. | PS Alloy | Koblend® |
