Order Products : sales@su-jiao.com
Haysite Plastics EHC
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Haysite Reinforced Plastics |
| Trademark: | Haysite Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WapQu9_Haysite-Plastics-EHC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This IEEE Class F 155°C high strength fiberglass mat reinforced thermoset polyester material exhibits substantial resistance to cold flow or creep under heat and pressure. Suggested applications include motor slot wedges, washers, brush plates and terminal boards. Available in thicknesses - .032" - 2.00". Standard color - Brown. Meets Gov't Specs - LP-509, I-24768/6. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.00 | g/cm³ | ASTM D792 |
| Water Absorption (Equilibrium) | 0.31 | % | ASTM D229 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Barcol Hardness | 74 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 89.6 | MPa | ASTM D638 |
| Flexural Modulus | 11800 | MPa | ASTM D790 |
| Flexural Strength | 186 | MPa | ASTM D790 |
| Compressive Strength | 303 | MPa | ASTM D695 |
| Shear Strength | 124 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 610 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (1.59 mm, Oil) | 18 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 60 Hz | 4.67 | ||
| 1 MHz | 4.30 | ||
| Dissipation Factor | ASTM D150 | ||
| 60 Hz | 0.019 | ||
| 1 MHz | 0.013 | ||
| Arc Resistance | 180 | sec | ASTM D495 |
| Dielectric Strength - Step-By-Step In Oil 1 | 62000 | V | ASTM D149 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Resistance | ASTM D229 | ||
| Burning Time | 3.7 | min | |
| Ignition Time | 1.4 | min |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Bond Strength (1.27 cm) | 13.8 | MPa | ASTM D229 |
| Temperature Rating | 155 | °C |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Parallel |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravaflex CIIR | Ravago Group | CIIR | Ravaflex |
| SEQUEL® 1718-PUV | LyondellBasell Industries | TPO (POE) | SEQUEL® |
| Styrolux® 3G55 | INEOS Styrolution Group GmbH | SBC | Styrolux® |
| Sumikon® EME-6310HX | Sumitomo Bakelite Co., Ltd. | Epoxy | Sumikon® |
| Eltex® P KS351 | INEOS Olefins & Polymers Europe | PP Random Copolymer | Eltex® P |
