Order Products : sales@su-jiao.com
PLUSTEK PB340S50
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Polyram Ram-On Industries |
| Trademark: | PLUSTEK |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WaBSNz_PLUSTEK-PB340S50.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 50% GLASS-BEADS REINFORCED,HEAT STABILIZED POLYAMIDE 6 FOR INJECTION MOULDING APPLICATIONS. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.45 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage | |||
| Flow | 0.80 to 1.2 | % | ASTM D955 |
| -- | 0.80 to 1.2 | % | ISO 294-4 |
| Water Absorption | |||
| Saturation | 5.8 | % | ASTM D570 |
| Saturation, 23°C | 5.8 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2000 | MPa | ASTM D638, ISO 527-2 |
| Tensile Strength (Yield) | 50.0 | MPa | ASTM D638, ISO 527-2 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | 3000 | MPa | ASTM D790, ISO 178 |
| Flexural Strength | 120 | MPa | ASTM D790, ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | 4.2 | kJ/m² | |
| 23°C | 4.3 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179 | ||
| -30°C | 40 | kJ/m² | |
| 23°C | 46 | kJ/m² | |
| Notched Izod Impact | |||
| 23°C | 35 | J/m | ASTM D256 |
| -30°C | 4.2 | kJ/m² | ISO 180 |
| 23°C | 4.5 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed | 190 | °C | ASTM D648, ISO 75-2/B |
| 1.8 MPa, Unannealed | 90.0 | °C | ASTM D648, ISO 75-2/A |
| Continuous Use Temperature | 80.0 | °C | Internal Method |
| Maximum Use Temperature 1 | 180 | °C | |
| Maximum Continuous Use Temperature | 80 | °C | |
| Melting Temperature | 218 | °C | ISO 11357-3, ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+17 | ohms·cm | IEC 60093 |
| Electric Strength | 80 | kV/mm | IEC 60243-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | Short Peaks Operation |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mapex A0520FB | Ginar Technology Co., LTD. | Nylon 66 | Mapex |
| Sindustris ABS LLG850W | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| ADDINYL A2 ZV15 | ADDIPLAST | Nylon 66 | ADDINYL |
| Electrafil® J-1200/CF/10 | Techmer Engineered Solutions | ABS | Electrafil® |
| POLYblend PC/ABS 85 M10 | Polykemi AB | PC+ABS | POLYblend |
