Order Products : sales@su-jiao.com
Braskem PE HDB0355
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem IDESA |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WYpv0Z_BraskemPEHDB0355.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The resin HDB0355 is a high density polyethylene copolymer developed for blow molding applications. This product is recommended for use in applications which require a combination of high top load strength and good environmental stress crack resistance (ESCR). This material meets the Food and Drug Administration requirements of 21CFR 177.1520. Typical Applications: Household containers, containers for the Chemical Industry (HIC) and for Pharmaceutical and Cosmetics Industry. Process: Blow Molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - Tangent | 1500 | MPa | ASTM D638 |
| Tensile Strength 1(Yield) | 27.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 700 | % | ASTM D638 |
| Flexural Modulus - Tangent | 1240 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 190 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 74.0 | °C | ASTM D648 |
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 131 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROMID A 280 G7 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| WPP PE PE25-Black | Washington Penn Plastic Co. Inc. | MDPE | WPP PE |
| barex® 210 Injection Grade | INEOS Barex | Nitrile Resin | barex® |
| Karina GRAY PVC COMPOUND 881-18/395-E-IS-BZ | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| Polifor® 20 BS/25 NATURALE | SO.F.TER. SPA | PP Homopolymer | Polifor® |
