Order Products : sales@su-jiao.com
InvisiSil™ IVS4752
| Category: | Silicone , Silicone |
| Manufacturer: | Momentive Performance Materials Inc. |
| Trademark: | InvisiSil™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WXcVya_InvisiSil-IVS4752.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
IVS4752 is a two-component, addition cure silicone rubber developed as an optical device coating. This product cures with heat to an elastomer. Key Features and Benefits
Potential Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.05 | g/cm³ |
| Films | Nominal Value | Unit | |
|---|---|---|---|
| Oxygen Permeability (1000 µm) | 20000 | cm³/m²/24 hr | |
| Water Vapor Transmission Rate (1000 µm) | 100 | g/m²/24 hr |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 2.7E-4 | cm/cm/°C |
| Optical | Nominal Value | ||
|---|---|---|---|
| Refractive Index | 1.410 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | |||
| -- 1 | Colorless | ||
| -- 2 | Colorless | ||
| Viscosity | |||
| 23°C 3 | 2.0 | Pa·s | |
| 23°C 4 | 5.0 | Pa·s | |
| 23°C 5 | 10 | Pa·s | |
| Pot Life (23°C) | 1400 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 72 | ||
| Lap Shear Strength | 2.60 | MPa | |
| Tensile Strength | 5.00 | MPa | |
| Tensile Elongation at Break | 70 | % | |
| Electric Strength | 30 | kV/mm | |
| Relative Permittivity (60 Hz) | 2.80 | ||
| Volume Resistivity | 1.0E+16 | ohms·cm | |
| Dissipation Factor (60 Hz) | 1.0E-3 |
| Note Message | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| 3 . | Part B |
| 4 . | After Mixing |
| 5 . | Part A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Precision Polymer V75B | Precision Polymer Engineering Ltd. | Fluorelastomer | Precision Polymer |
| Bayfill® 382 (58.8:100) | Covestro - PUR | PUR-MDI | Bayfill® |
| InnoTuf® HP-2170A | Innovative Polymers, Inc. | TSU | InnoTuf® |
| LNP™ THERMOTUF™ PX06416 compound | SABIC Innovative Plastics | Nylon 6 | LNP™ THERMOTUF™ |
| LNP™ THERMOCOMP™ MFB22S compound | SABIC Innovative Plastics | PP, Unspecified | LNP™ THERMOCOMP™ |
