Order Products : sales@su-jiao.com
SureSpec HD54-05
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WUQ0Xg_SureSpec-HD54-05.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HD54-05 is a High Molecular Weight Hexene certified prime copolymer developed for blow molding of high performance medium to large size industrial containers. HD54-05 features High-Swell, consistent processability, outstanding combination of ESCR, Impact strength, Stiffness, Creep resistance, and excellent chemical resistance. HD54-05 recommended processing temperature is 210 to 230°C.. HD54-05 complies with FDA regulation 21CFR 177.1520 (c) 3.2 (a) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.028 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (Compression Molded, F50) | > 1000 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 26.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 800 | % | ASTM D638 |
| Flexural Modulus 3 | 1170 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 380 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 45.0 | °C | ASTM D648 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Blow Molding Temperature | 210 - 230 | °C | |
| Test Made on injection molded Type 1 tension test specimen according to ASTM D2146 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LHF491 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| apilon 52bio® TB 65 | API SpA | TPU-Polyether | apilon 52bio® |
| APEX® RE 9203 | Teknor Apex Company | PVC, Rigid | APEX® |
| ENGAGE™ 7467 | The Dow Chemical Company | TPO (POE) | ENGAGE™ |
| MAGNUM™ 555 | Trinseo | ABS | MAGNUM™ |
