Order Products : sales@su-jiao.com
Braskem PE HS5502
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WTCIqg_Braskem-PE-HS5502.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HS5502 is a high density polyethylene, copolymer. Offers good processability and bottles produced have excellent stiffness. Application: Blow Molded Small Volume: Food, lubricant oils and pharmaceutical packing; Toys; Braskem does not recommend the use of HS5502 for the production of films. Process: Blow Molding; Injection Blow Molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.955 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.35 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 32 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1 | ASTM D1693 | ||
| 2.00mm, 10% Igepal, molded, F50 | 10.0 | hr | ASTM D1693 |
| 2.00mm, 100% Igepal, molded, F50 | 20.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 30.0 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1350 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Compression Molded) | 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 69.0 | °C | ASTM D648 |
| Injection instructions |
|---|
| Recommended Blow Molding Conditions: Feeding Zone: 185°C Barrel: 190°C Die: 195°C Mold Temperature: 5°C to 25°C Parison: 200°C |
| Note Message | |
|---|---|
| 1 . | 0.3mm notched-plaques |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Salflex 620TIS2 | Salflex Polymers Ltd. | PP Copolymer | Salflex |
| UBESTA 3030XA | UBE America, Inc. | Nylon 12 | UBESTA |
| O'Tech OW 939 | O'Tech Corporation | PVC, Unspecified | O'Tech |
| Polimid A 30 GF V0A | Poliblend S.p.a. | Nylon 66 | Polimid A |
| SABIC® HDPE B5823 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
