Order Products : sales@su-jiao.com
SABIC® LLDPE RG50035
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WSwgRH_SABIC-LLDPE-RG50035.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® LLDPE RG50035 is a Linear Low Density Polyethylene reactor powder grade typically used for various compounding applications, including Wire & Cable extrusion. SABIC® LLDPE RG50035 contains a low level of antioxidants and does not contain any antiblock and/or slip agents. Application
This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ISO 1183, ASTM D1505 |
| Apparent Density | 0.42 | g/cm³ | ASTM D1895 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238, ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Compression Molded) | 14.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | ||
| Yield, Compression Molded | 15 | % | |
| Break, Compression Molded | 100 | % | |
| Flexural Modulus (23°C, Compression Molded) | 490 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (Compression Molded) | 40 | kJ/m² | ISO 180/A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 114 | °C | ISO 306/A |
| Melting Temperature (DSC) | 125 | °C | Internal Method |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 7.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength 1 | 61 | kV/mm | ASTM D149 |
| Dielectric Constant (60 Hz) | 2.19 | ASTM D150 | |
| Dissipation Factor (60 Hz) | 5.0E-4 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | 500 V/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® B3Z BK30464 | BASF Corporation | Nylon 6 | Ultramid® |
| Nypol® PA A3 G30 BRC0001 NR392 | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
| DECAL® 5431 | Synres-Almoco BV | Phenolic | DECAL® |
| KOPLA PP KPX1067 | KOPLA Co., Ltd. | PP, Unspecified | KOPLA PP |
| LUVOCOM® 1301-8312-1 | Lehmann & Voss & Co. | PPS | LUVOCOM® |
