Order Products : sales@su-jiao.com
ENGAGE™ 8842
| Category: | TPO (POE) , Polyolefin Elastomer |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | ENGAGE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WODwUk_ENGAGE-8842.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ENGAGE™ 8842 Polyolefin Elastomer is an ultra-low density ethylene-octene copolymer which offers exceptional properties of an ultra-low density elastomer with the added potential of handling this polymer in pellet form. ENGAGE 8842 has excellent flow characteristics and provides superb impact properties in blends with polypropylene (PP) and polyethylene (PE). It performs well in TPO applications where superior low temperature impact properties are desired. Main Characteristics:
Applications:
|
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.857 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Mooney Viscosity (ML 1+4, 121°C) | 25 | MU | ASTM D1646 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A, 1 sec, Compression Molded | 54 | ||
| Shore D, 1 sec, Compression Molded | 11 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 100% Secant 1(Compression Molded) | 1.40 | MPa | ASTM D638 |
| Tensile Strength 2(Break, Compression Molded) | 3.00 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | 1200 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | ||
| 1% Secant : Compression Molded | 4.50 | MPa | |
| 2% Secant : Compression Molded | 4.00 | MPa |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 4 | 25.4 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -58.0 | °C | Internal Method |
| Melting Temperature (DSC) 5 | 38.0 | °C | Internal Method |
| Peak Crystallization Temperature (DSC) | 20.0 | °C | Internal Method |
| Note Message | |
|---|---|
| 1 . | 510 mm/min |
| 2 . | 510 mm/min |
| 3 . | 510 mm/min |
| 4 . | Die C |
| 5 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® Fine Powders T GREY 7238 SB | Arkema | Nylon 11 | Rilsan® Fine Powders |
| POWERSIL® 351 | Wacker Chemie AG | Silicone | POWERSIL® |
| VICTREX® PEEK 450FC30 | Victrex plc | PEEK | VICTREX® PEEK |
| POLYabs V0X | Polykemi AB | ABS | POLYabs |
| ULTEM™ HU1110 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
