Order Products : sales@su-jiao.com

Valtec HP423M

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	INDELPRO, S.A. de C.V.
Trademark:	Valtec
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	WNBrPu_Valtec-HP423M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Valtec is the new controlled morphology polypropylene manufactured by Indelpro using the Spheripol process. Compared to ordinary pelletized polypropylene, Valtec could present advantages in terms of improved productivity, better processing and lower energy consumption. End products can also have superior characteristics when using Valtec in a number of application areas. Valtec HP423M is a homopolymer particularly suitable for the extrusion of slit tape (raffia), monofilaments and general purpose injection molding. The base resin in this product meets the requirements of the U.S. Food and Drug Administration (FDA) contained in the Code of Federal Regulations in 21 CFR 177.1520.

Message

Valtec is the new controlled morphology polypropylene manufactured by Indelpro using the Spheripol process. Compared to ordinary pelletized polypropylene, Valtec could present advantages in terms of improved productivity, better processing and lower energy consumption. End products can also have superior characteristics when using Valtec in a number of application areas. Valtec HP423M is a homopolymer particularly suitable for the extrusion of slit tape (raffia), monofilaments and general purpose injection molding.

The base resin in this product meets the requirements of the U.S. Food and Drug Administration (FDA) contained in the Code of Federal Regulations in 21 CFR 177.1520.

General Information
Features	Food Contact Acceptable General Purpose Good Processability High Melt Stability Homopolymer Low Water Carryover
Uses	Fabrics General Purpose Industrial Applications Monofilaments Rope Strapping Tape Twine
Agency Ratings	FDA 21 CFR 177.1520
Forms	Pellets
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.900	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	3.8	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	35.0	MPa	ASTM D638
Tensile Elongation (Yield)	10	%	ASTM D638
Flexural Modulus	1400	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	37	J/m	ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	101	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
ASTADUR™ B4040G8-UV	Marplex Australia Pty. Ltd.	PBT	ASTADUR™
Cellophane™ 335LMS	Innovia Films Ltd.	Cellulose, Regenerated	Cellophane™
Chemlon® AF303	Teknor Apex Company (Chem Polymer)	Nylon 66	Chemlon®
Flontech® FT-CAR33-GR2-1	Guarniflon S.p.A. - Flontech Division	PTFE	Flontech®
LNP™ LUBRICOMP™ KFL25 compound	SABIC Innovative Plastics	Acetal (POM) Copolymer	LNP™ LUBRICOMP™