Order Products : sales@su-jiao.com
POLYCOMPO PE 20100J
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WLXszA_POLYCOMPO-PE-20100J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE 20100J is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific. Typical application: Caps/Lids/Closures. Primary characteristic: good aesthetics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.916 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 8.5 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 300 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 54 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Injection Molded | 9.00 | MPa | |
| Break, Injection Molded | 17.0 | MPa | |
| Tensile Strain (Break, Injection Molded) | 500 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 160 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 95.0 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 120 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Task® 14 | Smooth-On, Inc | PUR, Unspecified | Task® |
| AMTOPP CM15 | Inteplast Group | PP, Unspecified | AMTOPP |
| Europrene Latice® B 010 | Versalis S.p.A. | SBR, Emulsion | Europrene Latice® |
| Elastron® G G103.A80.B | Elastron USA, Inc. | SEBS | Elastron® G |
| OPNYL OP66GF33 | Ovation Polymers Inc. | Nylon 66 | OPNYL |
