Order Products : sales@su-jiao.com
Westlake LDPE EC1390AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WKfXLG_Westlake-LDPE-EC1390AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WESTLAKE low-density polyethylene EC1390 is used primarily in extrusion-coating applications that require fast line speeds and relatively low coating weights. When compared with other low-density polyethylene coating materials that have considerably lower melt indexes, EC1390 has slightly better adhesion to paper substrates and can be heat-sealed at a slightly lower temperature. However, high melt index coating materials produce slightly more neck-in and a narrower heat-sealing temperature. EC1390 - 1390P |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.915 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 15 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break, 23°C) | 9.00 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 23°C) | 300 | % | ASTM D638 |
| Flexural Modulus - 2% Secant 3(23°C) | 193 | MPa | ASTM D790 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 302 to 329 | °C |
| Note Message | |
|---|---|
| 1 . | Type IV, 500 mm/min |
| 2 . | Type IV, 500 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makroblend® UT250 HR | Covestro - Polycarbonates | PC+PET | Makroblend® |
| Andur AL 70 DP | Anderson Development Company | PUR-Eth,aliphat | Andur |
| Elastron® G G100.A20.B | Elastron USA, Inc. | SEBS | Elastron® G |
| ENVIROPLAS® ENV08-NC830 | ENVIROPLAS®, Inc. | PBT | ENVIROPLAS® |
| Kingfa PA6-M25G20 | Kingfa | Nylon 6 | Kingfa |
