Order Products : sales@su-jiao.com
KRATON® D1118 B
| Category: | SBC , Styrene Butadiene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | WHEtGR_KRATON-D1118-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1118 B is a clear, linear triblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from South America in the physical form(s) identified below.
Kraton D1118 B is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.938 | g/cm³ | ISO 2781 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 10 | g/10 min | ISO 1133 |
| Antioxidant Additive | 0.15 to 0.40 | % | Internal Method |
| Ash Content - Product form "BT" | 0.50 to 0.75 | % | |
| Extractables | < 1.0 | % | Internal Method |
| Polystyrene Content | 31 to 35 | % | Internal Method |
| Solution Viscosity | 470 to 790 | mPa·s | Internal Method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Diblock Content | 78.0 | ||
| Volatiles | < 1.0 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 10 sec) | 74 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(300% Strain) | 1.20 | MPa | ISO 37 |
| Tensile Stress 2(Yield) | 1.70 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 600 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | measured on films cast from a solution in toluene |
| 2 . | measured on films cast from a solution in toluene |
| 3 . | measured on films cast from a solution in toluene |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AIE PPO 9010F-SG20 | Asia International Enterprise (Hong Kong) Limited | PPE+PS | AIE PPO |
| Argothane® D7101 | Argotec LLC | TPU, Unspecified | Argothane® |
| Axiall PVC 8780 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Fluon® PTFE RB2515 | Asahi Glass Co., Ltd. | PTFE | Fluon® |
| G-PAEK™ G-COAT 500 | Gharda Chemicals Ltd. | PEK | G-PAEK™ |
