Order Products : sales@su-jiao.com
UNITIKA Nylon 6 EX-1222
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | UNITIKA Plastics Division |
| Trademark: | UNITIKA Nylon 6 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | W8vGA5_UNITIKA-Nylon-6-EX-1222.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UNITIKA Nylon 6 EX-1222 is a Polyamide 6 (Nylon 6) material. It is available in Asia Pacific or North America. Primary attribute of UNITIKA Nylon 6 EX-1222: Impact Resistant. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.07 | 1.07 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow : 3.20 mm | 1.4 | 1.4 | % | |
| Flow : 3.20 mm | 1.2 | 1.2 | % | |
| Water Absorption | ISO 62 | |||
| 23°C, 24 hr | 1.5 | 1.5 | % | |
| Equilibrium, 23°C, 50% RH | 2.2 | 2.2 | % |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 1900 | 710 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 46.0 | 32.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | |||
| Yield | 4.0 | -- | % | |
| Break | 120 | > 200 | % | |
| Flexural Modulus | 1800 | 700 | MPa | ISO 178 |
| Flexural Stress | 62.0 | 26.0 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 65 kJ/m² | No Break | ISO 179 | |
| Charpy Unnotched Impact Strength | No Break | No Break | ISO 179 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, Unannealed | 95.0 | -- | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 54.0 | -- | °C | ISO 75-2/A |
| CLTE - Flow | 1.0E-4 | 1.0E-4 | cm/cm/°C | ISO 11359-2 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 3.0E+15 | -- | ohms·cm | IEC 60093 |
| Electric Strength (1.00 mm) | 42 | -- | kV/mm | IEC 60243-1 |
| Dissipation Factor (1 MHz) | 0.020 | -- | IEC 60250 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP 49MK45 | Saudi Basic Industries Corporation (SABIC) | PP Copolymer | SABIC® PP |
| Shinko-Lac® ASA S510 | Mitsubishi Rayon America Inc. | ASA | Shinko-Lac® |
| SNOLEN® EB 1.4/46 | JSC Gazprom neftekhim Salavat | HDPE | SNOLEN® |
| Altuglas® HFI-10 | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® |
| Pebax® 6333 SP 01 | Arkema | PEBA-Ether | Pebax® |
