Order Products : sales@su-jiao.com
VENELENE® LA-0903
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Poliolefinas Internacionales, C.A. (Polinter) |
| Trademark: | VENELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | W8nY6X_VENELENE-LA-0903.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features:
Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 9.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 50 | µm | |
| Tensile Strength - MD (Break, 50 µm) | 12.0 | MPa | ASTM D882 |
| Tensile Elongation - MD (Break, 50 µm) | 400 | % | ASTM D882 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 270 - 350 | °C |
| Extrusion instructions |
|---|
| Die diameter: 0.7 to 1.0 mm. Substrate pulling speed: < 250 m/min. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P2825 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Sarlink® TPV 2550D | Teknor Apex Company | TPV | Sarlink® TPV |
| Desmovit® DP R CF20 | geba Kunststoffcompounds GmbH | TPU-Ester/Ether | Desmovit® |
| HANWHA EVA 1540 | Hanwha Chemical | EVA | HANWHA EVA |
| MAJORIS DFR310 | AD majoris | PP, Unspecified | MAJORIS |
