Order Products : sales@su-jiao.com
SureSpec HD53-7000
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | W7S9Ft_SureSpec-HD53-7000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HD53-7000 is a certified prime grade designed for injection molding of multi-cavity thin-wall food containers. HD53-7000 features a NARROW molecular weight distribution offering excellent processability, good impact strength, good dimensional stability and good warpage resistance. HD53-7000 recommended processing temperature is 210 to 230°C.with mold @ 20 to 40°C. HD53-7000 complies with FDR regulation 21CFR 177.1520(c) 3.1a and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 70 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 20.7 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 10 | % | ASTM D638 |
| Flexural Modulus - 2% Secant | 1030 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 84.1 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 69.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Test Made on injection molded Type 1 tension test specimen according to ASTM D2146 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 210 - 230 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205A HI HS | RTP Company | Nylon 6 | RTP |
| PRL TPSF-FRG30 | Polymer Resources Ltd. | PBT | PRL |
| MORETEC™ 0628G | Prime Polymer Co., Ltd. | LLDPE | MORETEC™ |
| 3M™ Dyneon™ TFM™ Modified PTFE TFM 1600 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ TFM™ Modified PTFE |
| Addisil™ IND 2050 E | Momentive Performance Materials Inc. | Rubber | Addisil™ |
