Order Products : sales@su-jiao.com
Syncure™ System S112FH
| Category: | XLPE , Crosslinked Polyethylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Syncure™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | W6oQbD_Syncure-System-S112FH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Syncure™ systems are two part moisture crosslinkable compounds. S112FH is an economical, RoHS Compliant, flame resistant building wire insulation. Graft resin component of this system has approximate shelf life of 6 months from the date of production. Please consult PolyOne for its use past 6 months. |
| General Information | |
|---|---|
| Uses |
|
| Wire Types |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
| Gel Content 1 | 68 | % | ASTM D2765 |
| Aging | Nominal Value | Unit | |
|---|---|---|---|
| Tensile strength retention (121°C, 1.91mm) 2 | 95 | % | |
| Elongation retention rate (121°C, 1.91mm) 3 | 90 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deformation (131°C) 4 | 10 | % | UL 1581 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame test- level | |||
| -- | Pass | CSA FT-2 | |
| -- | Pass | UL 1581 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Catalyst parent mixture- V-0030G RoHS 5 | 17 | % | |
| Transplant-based resin- S-1054A 6 | 83 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 7(Yield) | 19.3 | MPa | ASTM D638 |
| Tensile Elongation 8(Break) | 430 | % | ASTM D638 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (1 kHz) | 2.45 | ASTM D150 | |
| Dissipation Factor (1 kHz) | 4.0E-3 | ASTM D150 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| 注释：以上情况代表了在30密耳壁的14 AWG上测量得出的典型属性。存放和搬运：包装打开之后应在48小时之内使用，避免自硬化和报废。 |
| Note Message | |
|---|---|
| 1 . | Cross-linked PE, Method B (Non-Arbitration Test) |
| 2 . | 336 hours, UL standard |
| 3 . | 336 hours, UL standard |
| 4 . | 500g,1 hour |
| 5 . | V-0030G |
| 6 . | S-1054A |
| 7 . | Type 4, 510mm/min |
| 8 . | Type 4, 510mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TITANZEX® HF7700 | Lotte Chemical Titan (M) Sdn. Bhd. | HDPE | TITANZEX® |
| Nypol® PA B3 G10 PRTA011 NT390 MSP | Petropol Industry and Trade of Polymers LTDA | Nylon 6 | Nypol® PA |
| Nycal™ 1850R60 | Technical Polymers, LLC | Nylon 6 | Nycal™ |
| ASTALAC™ ABS KMS | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| LNP™ STAT-KON™ DEL33EC compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
