Order Products : sales@su-jiao.com
raplan® 298/2F
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | API SpA |
| Trademark: | raplan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | W4Rcz2_raplan-298-2F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| raplan®298/2F is a styrene-butadiene-styrene block copolymer (SBS) product,. It can be processed by extrusion or injection molding and is available in Europe. Typical application areas are: consumer goods. The main characteristics are: copolymer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.990 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 13 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.40 - 2.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| 100% secant | 5.00 | MPa | ASTM D638 |
| 300% secant | 8.50 | MPa | ASTM D638 |
| Tensile Strength | 10.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 650 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 52.0 | kN/m | ASTM D624 |
| Additional Information |
|---|
| Abrasion Resistance, DIN 53516: 80 mm³ |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 | °C | |
| Middle Temperature | 170 | °C | |
| Front Temperature | 170 | °C | |
| Nozzle Temperature | 180 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Injection Pressure: Medium to HighBack Pressure: Low to MediumLocking Pressure: Medium to High |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 | °C | |
| Cylinder Zone 2 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 160 | °C | |
| Cylinder Zone 4 Temp. | 170 | °C |
| Extrusion instructions |
|---|
| L/D Ratio: 20/28Compression Ratio: 1:2.5 to 1:2.8 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC P8183 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| POWERSIL® GEL C 670 A/B | Wacker Chemie AG | Silicone | POWERSIL® |
| RTP 305 EM | RTP Company | PC | RTP |
| Mowiol® 4-98 low ash | Kuraray Co., Ltd. | PVOH | Mowiol® |
| Hipolyene 1046 IFL | Zylog Plastalloys | TPO (POE) | Hipolyene |
