Order Products : sales@su-jiao.com

Ravago Compounds HMP-305W (Roto)

Category:	LMDPE , Linear Medium Density Polyethylene
Manufacturer:	Ravago Manufacturing Americas, LLC
Trademark:	Ravago Compounds
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	W4DzHS_Ravago-Compounds-HMP-305W-Roto-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Key Features:

35-mesh powder

Good moldability

Exceptional long term outdoor weatherability (UV15)

Balance of toughness and rigidity

Excellent low temperature impact

Excellent environmental stress crack resistance, ESCR

Compounded for uniform additive dispersion

Natural as well as standard, custom or special effect colors available

Stock colors may be available. See Stock color bulletin

UL component recognition listing (E141240)

Also available in pellet form as HM-305W

General Information
Features	Good Moldability Good Toughness Good Weather Resistance High ESCR (Stress Crack Resist.) Low Temperature Impact Resistance Medium Rigidity
UL File Number	E141240
Appearance	Colors Available Natural Color
Forms	Powder
Processing Method	Rotational Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.934	g/cm³	ASTM D792
Apparent Density ¹	0.34	g/cm³	ASTM D1895
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	5.0	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, Rotational Molded, F50)	1000	hr	ASTM D1693B

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, Rotational Molded)	19.3	MPa	ASTM D638
Tensile Elongation (Break, Rotational Molded)	400	%	ASTM D638
Flexural Modulus - Tangent (Rotational Molded)	793	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Impact Strength ²(-40°C, Rotational Molded)	92	J	ARM

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed, Rotational Molded	63.0	°C
1.8 MPa, Unannealed, Rotational Molded	42.0	°C

Flammability	Nominal Value		Test Method
Flame Rating			UL 94
1.52 mm	HB
3.05 mm	HB

Additional Information	Nominal Value	Unit	Test Method
Pourability ³	30.0	sec	ASTM D1895

Note Message
1 .	35-mesh powder
2 .	F50
3 .	35-mesh powder

Resin Grade	Manufacturer	Category	Trademark
POLYplex PMMA 700	Polykemi AB	Acrylic (PMMA)	POLYplex
FORMULA P ELAN XP 515	Putsch Kunststoffe GmbH	PP, Unspecified	FORMULA P
IROGRAN® A 85 D 4968	Huntsman Corporation	TPU-Polyester	IROGRAN®
PETOPLEN MH 180	PETKIM Petrokimya Holding A.S.	PP, Unspecified	PETOPLEN
KMI KM6034	KMI Group, Inc.	SBC	KMI