Order Products : sales@su-jiao.com
TRIBOCOMP® PC CF10 TS0
| Category: | PC , Polycarbonate |
| Manufacturer: | EPIC Polymers |
| Trademark: | TRIBOCOMP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | W1H72G_TRIBOCOMP-PC-CF10-TS0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TRIBOCOMP® PC CF10 TS0 is a Polycarbonate (PC) product filled with 10% carbon fiber and 15% ptfe fiber. It is available in Europe. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.33 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow | 0.25 | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.10 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-2 | ||
| 23°C | 7900 | MPa | |
| 90°C | 6800 | MPa | |
| 120°C | 5900 | MPa | |
| Tensile Stress | ISO 527-2 | ||
| Yield, 23°C | 115 | MPa | |
| Yield, 90°C | 75.0 | MPa | |
| Yield, 120°C | 60.0 | MPa | |
| Tensile Strain (Break, 23°C) | 2.0 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 8100 | MPa | ISO 178 |
| Flexural Stress (23°C) | 175 | MPa | ISO 178 |
| Coefficient of Friction | ASTM D3702 | ||
| vs. Itself - Dynamic | 0.25 | ||
| vs. Itself - Static | 0.20 | ||
| Wear Factor | 32 | 10^-8 mm³/N·m | ASTM D3702 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 9.0 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | 35 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 140 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 135 | °C | ISO 75-2/A |
| CLTE - Flow (23°C) | 2.8E-5 | cm/cm/°C | ISO 7991 |
| Thermal Conductivity | 0.47 | W/m/K | ISO 22007 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+3 | ohms | ASTM D257 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 260 to 300 | °C | |
| Cylinder Zone 2 Temp. | 270 to 320 | °C | |
| Cylinder Zone 3 Temp. | 275 to 320 | °C | |
| Cylinder Zone 4 Temp. | 275 to 320 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Delta PPO/PA 910 | Delta Polymers | PPE+PS+Nylon | Delta |
| Hanwha Total PP BI970 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| LNP™ COLORCOMP™ AX98567H compound | SABIC Innovative Plastics | ABS | LNP™ COLORCOMP™ |
| Plenco 02311 (Transfer) | Plastics Engineering Co. | Phenolic | Plenco |
| Ultramid® A3HG6 HR | BASF Corporation | Nylon 66 | Ultramid® |
