Order Products : sales@su-jiao.com
Pearlthane® 16N60D
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Pearlthane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Vzi9G6_Pearlthane-16N60D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Pearlthane® 16N60D is a polyether-based TPU, supplied in form of opaque pellets, combining high hardness with excellent mechanical properties and good hydrolysis and microbial resistance. Pearlthane® 16N60D is especially designed for injection moulding processes. Pearlthane® 16N60D is especially designed for the production of moulded technical parts where excellent mechanical properties at low temperature, hydrolysis resistance and higher hardness are required. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.16 | g/cm³ | ASTM D792 |
| 20°C | 1.16 | g/cm³ | ISO 2781 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ASTM D2240, ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412, ISO 527 | ||
| 100% strain | 19.0 | MPa | ASTM D412, ISO 527 |
| 300% strain | 34.0 | MPa | ASTM D412, ISO 527 |
| Tensile Strength (Yield) | 40.0 | MPa | ASTM D412, ISO 527 |
| Tensile Elongation (Break) | 400 | % | ASTM D412, ISO 527 |
| Tear Strength | |||
| -- 1 | 190 | kN/m | ASTM D624 |
| -- | 190 | kN/m | ISO 34-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature 2 | 195 - 205 | °C | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 - 110 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 215 | °C | |
| Middle Temperature | 210 | °C | |
| Front Temperature | 205 | °C | |
| Nozzle Temperature | 210 | °C | |
| Mold Temperature | 35.0 | °C |
| Injection instructions |
|---|
| Closing Force: 30 tonsScrew Diameter: 30 mmL/D Ratio: 23Maximum Hydraulic Pressure: 210 barMold: Plaque 120x120x2 mm |
| Note Message | |
|---|---|
| 1 . | C mould |
| 2 . | Temperature at which MFI = 10 g/10 min @ 21.6 kg |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTV-2 XP-429 | Silicones, Inc. | Silicone Rubber, RTV-2 | RTV-2 |
| TECOLITE KM-2000(G) | KYOCERA Chemical Corporation | Phenolic | TECOLITE |
| VENYL UE037 - 8139 | AD majoris | Nylon 66 | VENYL |
| ACCUTECH™ CP0437C20L1 | ACLO Compounders Inc. | PP Copolymer | ACCUTECH™ |
| Polyclear® Splash PET 3301 | Indorama Ventures Polymers México | PET | Polyclear® |
