Order Products : sales@su-jiao.com
Xuchuan 2006/B-8016
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Xuchuan Chemical (Suzhou) Co., Ltd |
| Trademark: | Xuchuan |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VyWU24_Xuchuan-2006-B-8016.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Xuchuan 2006/B-8016 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) product. It is available in Asia Pacific. Typical application: Consumer Goods. Primary characteristic: good aesthetics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.420 to 0.550 | g/cm³ | |
| Density | |||
| A-2006 : 40°C | 1.010 to 1.020 | g/cm³ | |
| B-8016 : 40°C | 1.080 to 1.200 | g/cm³ | |
| Viscosity | |||
| A-2006 : 40°C | 1.20 to 2.00 | Pa·s | |
| B-8016 : 40°C | 0.600 to 0.800 | Pa·s |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Cream Time | 6.0 to 8.0 | sec | |
| End of Rise Time | 35.0 to 40.0 | sec |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Free Rise Foam Density | 180 to 250 | kg/m³ | |
| Hydrolysis Strength Retention (70°C) 1 | > 70 | % | |
| Preheat Temperature | |||
| Part A | 50 to 60 | °C | |
| Part B | 50 to 60 | °C | |
| Preheat Time | |||
| Part A | 6.0 to 8.0 | hr | |
| Part B | 8.0 to 12.0 | hr | |
| Processing Temperature | |||
| Part A | 40 to 45 | °C | |
| Part B | 38 to 42 | °C |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore C) | 50 to 62 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (Break) | 3.00 to 4.50 | MPa | |
| Tensile Elongation (Break) | 400 to 600 | % | |
| Tear Strength | 15.0 to 20.0 | kN/m |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Weight: 74 to 76 | ||
| Demold Time | 5.0 to 7.0 | min |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 55.0 to 65.0 | °C |
| Note Message | |
|---|---|
| 1 . | 168 hr, 95% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenac™ 4010 | Asahi Kasei Chemicals Corporation | Acetal (POM) Homopolymer | Tenac™ |
| Terlux® 2812 | INEOS Styrolution Group GmbH | MABS | Terlux® |
| Unichem 6743 CLEAR | Colorite Polymers | PVC, Unspecified | Unichem |
| Delrin® 327UVE NC010 | DuPont Performance Polymers | Acetal (POM) Homopolymer | Delrin® |
| Isocor™ HW115SI | Shakespeare Monofilaments and Specialty Polymers | Nylon 610 | Isocor™ |
