Order Products : sales@su-jiao.com
GERMAFORM 9 MF 10
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Kunststoff-Kontor-Hamburg GmbH |
| Trademark: | GERMAFORM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VsPTDd_GERMAFORM-9-MF-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GERMAFORM 9 MF 10 is a polyoxymethylene (POM) copolymer material, which contains a 10% mineral filler. This product is available in Europe,. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.49 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) | 7.00 | cm³/10min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3500 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 60.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 6.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 100 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 166 | °C |
| Additional Information |
|---|
| Charyp Unnotched Impact, ISO 179, Type 1, Edgewise: >100 kJ/m² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Reny® 2686 | Mitsubishi Engineering-Plastics Corp | PARA | Reny® |
| NYLEM® 66 GTF 45 | EMAS Plastik San.Tic.AS. | Nylon 66 | NYLEM® |
| Flontech® FT-1-1E | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| HiFill® PA6 0254 C | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| LUVOCOM® 1-7789/EG VP | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
