Extir® D 3000 AE

Category:	PS (EPS) , Expanded Polystyrene
Manufacturer:	Versalis S.p.A.
Trademark:	Extir®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	VrKLdF_Extir-D-3000-AE.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Extir D 3000 AE is a flame-retardant expandable polystyrene in the form of spherical beads of medium particle size, containing pentane as blowing agent. Extir does not contain CFC or HCFC. Extir D 3000 AE is used for production of shaped mouldings with sections higher than 8 mm or medium density blocks. This grade is characterised by fast moulding cycles, good fusion and low energy needs combined with a high mechanical strength and a good surface finishing. Extir D 3000 AE is used mainly in medium section, medium / high density packaging where, for legislative or safety reasons, the use of a flame retardant material is required. It is also suitable for the production of skin moulded articles. Typical applications are: industrial packaging, e.g. cathode ray tube protection medium-high density blocks for thermal insulation moulded panels for underfloor heating moulded insulating drainage panels moulded or block-cut building components.

Message

Extir D 3000 AE is a flame-retardant expandable polystyrene in the form of spherical beads of medium particle size, containing pentane as blowing agent.
Extir does not contain CFC or HCFC.
Extir D 3000 AE is used for production of shaped mouldings with sections higher than 8 mm or medium density blocks. This grade is characterised by fast moulding cycles, good fusion and low energy needs combined with a high mechanical strength and a good surface finishing.

Extir D 3000 AE is used mainly in medium section, medium / high density packaging where, for legislative or safety reasons, the use of a flame retardant material is required. It is also suitable for the production of skin moulded articles.

Typical applications are:

industrial packaging, e.g. cathode ray tube protection

medium-high density blocks for thermal insulation

moulded panels for underfloor heating

moulded insulating drainage panels

moulded or block-cut building components.

General Information
Additive	Blowing Agent 2 Flame Retardant
Features	Expandable Fast Molding Cycle Flame Retardant Good Surface Finish High Strength Thermally Insulating
Uses	Building Materials Construction Applications Industrial Applications Packaging Reinforced Panels
Agency Ratings	DIN 4102/B1
Forms	Spheres

Physical	Nominal Value	Unit
Density	0.0170 to 0.0350	g/cm³
Apparent Density
-- ¹	0.02	g/cm³
--	0.59 to 0.63	g/cm³
Particle Size	600 to 1000	µm

Note Message
1 .	on a continuous pre-expander after one expansion

Resin Grade	Manufacturer	Category	Trademark
Manner Flexible PVC V981 NAT601	Manner Plastics, L.P.	PVC, Flexible	Manner Flexible PVC
Braskem PP 6D43	Braskem America Inc.	PP Random Copolymer	Braskem PP
ARCEL® 640 (3.00 pcf)	NOVA Chemicals	PS+PE	ARCEL®
KOCETAL® WR301	Kolon Plastics, Inc.	Acetal (POM) Copolymer	KOCETAL®
Magnobond 6398	Magnolia Plastics, Inc.	Epoxy	Magnobond