Order Products : sales@su-jiao.com
Comco PEEK
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Comco-Plastic GmbH |
| Trademark: | Comco |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Vqvy5T_Comco-PEEK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Comco PEEK is a Polyetheretherketone (PEEK) material. It is available in Europe. Primary attribute of Comco PEEK: Flame Rated. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.31 | g/cm³ | ISO 1183 |
| Water Absorption | |||
| Saturation, 23°C | 0.45 | % | |
| Equilibrium, 23°C, 50% RH | 0.20 | % | |
| Water Absorption | ISO 62 | ||
| after 24 h immersion in water : 23°C | 5.0 | mg | |
| after 96 h immersion in water : 23°C | 10.0 | mg |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Maximum Service Temperature | |||
| in air continuosly | 250 | °C | |
| in air for short periods | 310 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 105 | ISO 2039-2 | |
| Ball Indentation Hardness | 230 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 4400 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 110 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 20 | % | ISO 527-2 |
| Compressive Stress | ISO 604 | ||
| 2% Strain | 57.0 | MPa | |
| 1% Strain | 29.0 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 3.5 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | No Break | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 160 | °C | ISO 75-2/A |
| Melting Temperature | 340 | °C | |
| CLTE - Flow | |||
| 23 to 60°C | 5.0E-5 | cm/cm/°C | |
| 23 to 100°C | 5.0E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.25 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+13 | ohms | IEC 60093 |
| Volume Resistivity | > 1.0E+14 | ohms·cm | IEC 60093 |
| Electric Strength | 24 | kV/mm | IEC 60243-1 |
| Relative Permittivity | IEC 60250 | ||
| 100 Hz | 3.20 | ||
| 1 MHz | 3.20 | ||
| Dissipation Factor | IEC 60250 | ||
| 100 Hz | 1.0E-3 | ||
| 1 MHz | 2.0E-3 | ||
| Comparative Tracking Index | 150 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 3.00 mm | V-0 | ||
| 6.00 mm | V-0 | ||
| Oxygen Index | 35 | % | ISO 4589-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUPRAN® LFT PA A1350 | SAMBARK | Nylon 66 | SUPRAN® LFT PA |
| Nycal™ 1850R33 | Technical Polymers, LLC | Nylon 6 | Nycal™ |
| Diakon® LG156 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| INSPIRE™ 114 EU | Braskem Europe GmbH | PP, Unspecified | INSPIRE™ |
| Plyophen 43243 | Durez Corporation | Phenolic | Plyophen |
