Order Products : sales@su-jiao.com
Milastomer™ W750B
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Mitsui Chemicals America, Inc. |
| Trademark: | Milastomer™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VnDnc1_Milastomer-W750B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Milastomer™W750B is a thermoplastic vulcanized rubber (TPV) material,. This product is available in North America and is processed by blow molding or extrusion. Milastomer™Typical application areas of W750B are: engineering/industrial accessories |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.880 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/10.0 kg) | 45 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ISO 48 | ||
| Shaw A | 75 | ISO 48 | |
| Shaw A, 5 seconds | 70 | ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 2.80 | MPa | ISO 37 |
| Tensile Stress 2(Break) | 6.80 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 580 | % | ISO 37 |
| Compression Set | ISO 815 | ||
| 23°C, 22 hr | 34 | % | ISO 815 |
| 70°C, 22 hr | 47 | % | ISO 815 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -60.0 | °C | Internal method |
| Additional Information |
|---|
| All tests performed according to Mitsui methods. |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| 3 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Pro-Comp™ PPHGF30-E | Southland Polymers | PP Homopolymer | Pro-Comp™ |
| TUFNYL® RGF 33 INDICA GREY | SRF Ltd. | Nylon 66 | TUFNYL® |
| Bluestar Epoxy EX-17D | Bluestar New Chemical Materials Co. Ltd | Epoxy | Bluestar Epoxy |
| HiFill® PA6/6,6 GF30 IM2 HS L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| Plaslube® PA6 CF30 TS15 BK | Techmer Engineered Solutions | Nylon 6 | Plaslube® |
