Order Products : sales@su-jiao.com
NANCAR® 1052M43
| Category: | NBR , Acrylonitrile Butadiene Rubber |
| Manufacturer: | Nantex Industry Co., Ltd. |
| Trademark: | NANCAR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VlM8Dv_NANCAR-1052M43.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NANCAR® 1052M43 is a medium high acrylonitrile butadiene copolymer with good oil resistance. It is a low Mooney version of NANCAR 1052. The low Mooney provides optimum processing property in highly filled or reinforced compounds. NANCAR® 1052M43 , similar to NANCAR 1052, is an excellent multi-purpose nitrile elastomer. It is particularly recommended for shoes, rolls, transfer molding or extrusion and for frictioning or coating fabrics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.980 | g/cm³ | |
| Mooney Viscosity (ML 1+4, 100°C) | 43 | MU | ASTM D1646 |
| Acrylonitrile Content - Bound | 33.0 | % | Internal Method |
| Solubility - in MEK | 100 | % | |
| Stabilizer | Non-staining |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Loss | 0.40 | % | ASTM D5688 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A 1 | 71 | ||
| Shore A 2 | 70 | ||
| Shore A 3 | 69 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 300% Strain 4 | 6.86 | MPa | |
| 300% Strain 5 | 8.53 | MPa | |
| 300% Strain 6 | 9.12 | MPa | |
| Tensile Strength | ASTM D412 | ||
| Yield 7 | 26.8 | MPa | |
| Yield 8 | 26.5 | MPa | |
| Yield 9 | 23.8 | MPa | |
| Tensile Elongation | ASTM D412 | ||
| Break 10 | 750 | % | |
| Break 11 | 690 | % | |
| Break 12 | 650 | % | |
| Tear Strength | 61.8 | kN/m | ASTM D624 |
| Compression Set 13(100°C, 70 hr) | 57 | % | ASTM D395 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 14(100°C, 70 hr) | 0.0 | % | ASTM D865 |
| Change in Ultimate Elongation in Air 15(100°C, 70 hr) | -28 | % | ASTM D865 |
| Change in Durometer Hardness in Air 16(Shore A, 100°C, 70 hr) | 5.0 | ASTM D865 | |
| Change in Tensile Strength 17 | ASTM D471 | ||
| 100°C, 70 hr, in ASTM #1 Oil | -5.0 | % | |
| 100°C, 70 hr, in ASTM #3 Oil | -18 | % | |
| Change in Ultimate Elongation 18 | ASTM D471 | ||
| 100°C, 70 hr, in ASTM #1 Oil | -25 | % | |
| 100°C, 70 hr, in ASTM #3 Oil | -19 | % | |
| Change in Durometer Hardness 19 | ASTM D471 | ||
| Shore A, 100°C, 70 hr, in ASTM #1 Oil | 1.0 | ||
| Shore A, 100°C, 70 hr, in ASTM #3 Oil | -11 | ||
| Change in Volume 20 | ASTM D471 | ||
| 100°C, 70 hr, in ASTM Oil #1 | 0.20 | % | |
| 100°C, 70 hr, in ASTM Oil #3 | 19 | % |
| Note Message | |
|---|---|
| 1 . | Cured for 60.0 min at 150°C |
| 2 . | Cured for 40.0 min at 150°C |
| 3 . | Cured for 20.0 min at 150°C |
| 4 . | Cured for 20.0 min at 150°C |
| 5 . | Cured for 40.0 min at 150°C |
| 6 . | Cured for 60.0 min at 150°C |
| 7 . | Cured for 60.0 min at 150°C |
| 8 . | Cured for 40.0 min at 150°C |
| 9 . | Cured for 20.0 min at 150°C |
| 10 . | Cured for 20.0 min at 150°C |
| 11 . | Cured for 40.0 min at 150°C |
| 12 . | Cured for 60.0 min at 150°C |
| 13 . | Cured for 60.0 min at 150°C |
| 14 . | Cured for 40.0 min at 150°C |
| 15 . | Cured for 40.0 min at 150°C |
| 16 . | Cured for 40.0 min at 150°C |
| 17 . | Cured for 40.0 min at 150°C |
| 18 . | Cured for 40.0 min at 150°C |
| 19 . | Cured for 40.0 min at 150°C |
| 20 . | Cured for 40.0 min at 150°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RIALBATCH H 02 SD 70 B | RIALTI Srl | PP Homopolymer | RIALBATCH |
| Vistalon™ 6602 | ExxonMobil Chemical | EPDM | Vistalon™ |
| Niblend S85 | Soredi S.p.a. | PC+ABS | Niblend |
| Altuglas® BS 520 | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® |
| Dugdale PVC Flexible Injection Molding - Shore A 58 Compound | Dugdale Plc | PVC, Flexible | Dugdale PVC |
