Order Products : sales@su-jiao.com
Generic CA
| Category: | CA , Cellulose Acetate |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VkOVZY_Generic-CA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic CA This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.26 - 1.32 | g/cm³ | ASTM D792 |
| Water Absorption (23°C, 24 hr) | 2.3 - 2.5 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 40 - 100 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 23.4 - 38.0 | MPa | ASTM D638 |
| Fracture, 23°C | 28.6 - 46.9 | MPa | ASTM D638 |
| Tensile Elongation (Yield, 23°C) | 25 - 55 | % | ASTM D638 |
| Flexural Modulus (23°C) | 758 - 1950 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 24.1 - 71.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 130 - 330 | J/m | ASTM D256 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 2.9 - 8.5 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.3 - 71.1 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Rear Temperature | 176 - 224 | °C | |
| Middle Temperature | 177 - 224 | °C | |
| Front Temperature | 177 - 238 | °C | |
| Nozzle Temperature | 188 - 216 | °C | |
| Mold Temperature | 48.9 - 60.0 | °C | |
| Injection Pressure | 7.07 - 14.5 | MPa | |
| Back Pressure | 0.172 - 0.224 | MPa | |
| Vent Depth | 0.064 - 0.41 | mm |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic CAThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shuman PC 930 | Shuman Plastics, Inc. | PC | Shuman PC |
| Moplen EPF30R | Shazand (Arak) Petrochemical Corporation | PP Copolymer | Moplen |
| TYNEC® 600 | Tyne Plastics LLC. | PC | TYNEC® |
| Forprene® 6NE901A60 | SO.F.TER. SPA | TPV | Forprene® |
| Hytrel® 6356 | DuPont Performance Polymers | TPC-ET | Hytrel® |
