Order Products : sales@su-jiao.com
Hytrel® G4078LS NC010
| Category: | TPC-ET , THERMOPLASTIC POLYESTER ELASTOMER |
| Manufacturer: | DuPont Performance Polymers |
| Trademark: | Hytrel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VgqyYE_Hytrel-G4078LS-NC010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 40 Shore D Standard Performance Polyester Elastomer with Light Protection |
| General Information | |
|---|---|
| Additive |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Multi-Point Data |
|
| Part Marking Code (ISO 11469) |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.5 | g/10 min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 1.2 | % | |
| Flow | 0.50 | % | |
| Water Absorption | |||
| 24 hr | 3.5 | % | ASTM D570 |
| 23°C, 24 hr, 2.00 mm | 6.8 | % | ISO 62 |
| Equilibrium, 23°C, 2.00 mm, 50% RH | 0.70 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 54.0 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| Break | 21.0 | MPa | |
| 10% Strain | 4.20 | MPa | |
| Tensile Strain (Break) | > 300 | % | ISO 527-2 |
| Flexural Modulus | 58.0 | MPa | ISO 178 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength - Flow | 70 | kN/m | ISO 34-1 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -40°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature 1 | 175 | °C | ISO 11357-3 |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 MS SI | RTP Company | Nylon 66 | RTP |
| NEFTEKHIM PE 2060V (60118) | Nizhnekamskneftekhim Inc. | HDPE | NEFTEKHIM PE |
| ARC ARC2200 | ARC Resin Corporation | PC | ARC |
| Ferro PP LPP20BN51AL | Ferro Corporation | PP, Unspecified | Ferro PP |
| POLYfill PPH TS15040 | Polykemi AB | PP Homopolymer | POLYfill |
