Order Products : sales@su-jiao.com
Andur 8 APLM
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VdDpRe_Andur-8-APLM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 8 APLM is a polyester based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 79 to 82 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various poyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 3700 | cP | ASTM D2393 |
| 100°C | 1030 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 3 to 3.45%Specific Gravity, ASTM D792, 70°F: 1.16 g/mlSpecific Gravity, ASTM D792, 212°F: 1.14 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAFORM® 9 B AR | A. Schulman Europe | Acetal (POM) Copolymer | SCHULAFORM® |
| SCANAMID 66 A13^ F15 | Polykemi AB | Nylon 66 | SCANAMID 66 |
| TangoBlack™ FLX973 | Stratasys | Unspecified | TangoBlack™ |
| Elexar® EL-8730B | Teknor Apex Company | TPE | Elexar® |
| Mablex 466 | Ravago Group | PC+ABS | Mablex |
