Order Products : sales@su-jiao.com
Braskem PE SGF4950HS
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VaYV8L_BraskemPESGF4950HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SGF4950HS is a High Density Polyethylene, copolymer, offering an outstanding combination of good processability and excellent stress cracking resistance (ESCR). It is recommended for the production of containers, flasks and bottles up to 30 liters for the transport of chemical products. The minimum biobased content of this grade is 95%, determined according to ASTM D6866. Application: Suggested uses include: Canisters from 2 to 20L for chemical products; Flasks for concentrated detergent. Others applications: Reservoir for wind shield wiper and air ducts. Process: Blow Molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.951 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.21 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 20 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 50°C, 2.00mm, 10% Igepal, molded, F50 | 150 | hr | ASTM D1693 |
| 50°C, 2.00mm, 100% Igepal, molded, F50 | 1000 | hr | ASTM D1693 |
| Biobased Content | 95 | % | ASTM D6866 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, Compression Molded) | 35.0 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Compression Molded) | 180 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 70.0 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA1212 Reinforced Nylon 1212 | Shandong Guangyin New Materials Co., Ltd. | Nylon 1212 | Shandong PA1212 |
| Axiall PVC 16782 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| ISPLEN® PM 281 BV | REPSOL | PP Copolymer | ISPLEN® |
| Hostacom G1 H01 | LyondellBasell Industries | PP Homopolymer | Hostacom |
| SABIC® LLDPE 318B | Saudi Basic Industries Corporation (SABIC) | LLDPE | SABIC® LLDPE |
