Order Products : sales@su-jiao.com
KRATON® G7705 GI-N
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VaLsyW_KRATON-G7705-GI-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton G7705 GI-N is an easy processing, general purpose 44 Shore A hardness material designed for a wide variety of applications. It is supplied from North America in the physical form identified below.
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 to 1.25 | g/cm³ | Internal Method |
| Molding Shrinkage - Flow | 1.7 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 39 to 49 | Internal Method |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 2.07 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 4.14 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 700 | % | ASTM D412 |
| Tear Strength | 17.5 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 23°C, 22 hr | 15 | % | |
| 70°C, 22 hr | 38 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (150°C, 158 hr) | 35 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (150°C, 158 hr) | 25 | % | ASTM D573 |
| Change in Durometer Hardness in Air (Shore A, 150°C, 158 hr) | 2.0 | ASTM D573 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -52.8 | °C | ASTM D746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Burning Rate (1.27 mm) | 51 | mm/min | FMVSS 302 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ozone Resistance 1(38°C) | No Cracking | ASTM D518/1149 | |
| Temperature - Long Term Upper Service | > 125 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 193 to 204 | °C | |
| Front Temperature | 204 to 216 | °C | |
| Nozzle Temperature | 216 to 232 | °C | |
| Injection Pressure | 3.45 to 4.83 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.689 to 1.38 | MPa |
| Note Message | |
|---|---|
| 1 . | 100 pphm, 72 hrs, 7X magnification |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® 2807 | Covestro - Polycarbonates | PC | Makrolon® |
| RTP 800 | RTP Company | Acetal (POM) Copolymer | RTP |
| SIMONA® PVC-C CORAN Industrial Grade | SIMONA AMERICA, Inc. | PVC, Rigid | SIMONA® |
| FORMULA P FIB 3620/L | Putsch Kunststoffe GmbH | PP, Unspecified | FORMULA P |
| Kepamid® 1515SM7 | Korea Engineering Plastics Co., Ltd | Nylon 6 | Kepamid® |
