Order Products : sales@su-jiao.com
HIPEX® HX8ICN (Series: HTR/OR)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KRAIBURG TPE |
| Trademark: | HIPEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VYSMgP_HIPEX-HX8ICN-Series-HTR-OR-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The HTR/OR Series is your material solution for applications requiring high temperature and oil resistance. Typical applications
Material advantages
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 72 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield) | 6.00 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 250 | % | ISO 37 |
| Tear Strength | 19 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 31 | % | ISO 815 |
| 70°C, 24 hr | 55 | % | ISO 815 |
| 100°C, 24 hr | 59 | % | ISO 815 |
| 120°C, 24 hr | 69 | % | ISO 815 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 105 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 210 | °C | |
| Middle Temperature | 220 | °C | |
| Front Temperature | 230 | °C | |
| Mold Temperature | 40.0 - 60.0 | °C | |
| Injection Pressure | 120 - 200 | MPa | |
| Back Pressure | 2.00 - 5.00 | MPa |
| Injection instructions |
|---|
| Hot Runner Temperature: 180 - 220°CThe runner should be empty after a maximum of 2 - 3 shots. |
| Note Message | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKNIFLEX® ECO P5P | Tekni-Films, a div of Tekni-Plex | Film, PP/COC/EVOH/PP | TEKNIFLEX® ECO |
| TEREZ PA 6.6 7510 GF 50 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| UBESTA XPA 9063 X1 | UBE Engineering Plastics, S.A. | Nylon 12 Elast | UBESTA |
| 4DUR® 9K22115 FR1 | 4Plas | PBT | 4DUR® |
| NORYL™ PPX640 resin | SABIC Innovative Plastics | PPE+PS+PP | NORYL™ |
