Andur 6 DPLM

Category: PUR-Ester/TDI , Polyurethane (Polyester, TDI)
Manufacturer: Anderson Development Company
Trademark: Andur
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: VYE3OG_Andur-6-DPLM.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Andur 6-DP-LM is a polyester based, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 60 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers.
General Information
Forms
  • Liquid
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.21g/cm³ASTM D792
ThermosetNominal ValueUnitTest Method
Thermoset Mix Viscosity ASTM D2393
    21°C 115000cPASTM D2393
    70°C 1700cPASTM D2393
    100°C 380cPASTM D2393
Additional Information
NCO: 6.4 to 6.8%Specific Gravity, ASTM D792, 70°F: 1.21 g/mlSpecific Gravity, ASTM D792, 212°F: 212 g/ml
Resin Grade Manufacturer Category Trademark
Shin-Etsu RTV KE-40RTV Shin-Etsu Silicones of America Silicone Rubber, RTV-1 Shin-Etsu RTV
Elexar® EL-8623 Teknor Apex Company TPE Elexar®
EpoxAcoat® Red Smooth-On, Inc Epoxy EpoxAcoat®
HIVOREX 8301B Lotte Chemical Corporation HDPE HIVOREX
CYCOLOY™ CX2142ME resin SABIC Innovative Plastics PC+ABS CYCOLOY™