Order Products : sales@su-jiao.com
Hipolyene 3040 B (M)
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Zylog Plastalloys |
| Trademark: | Hipolyene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VWe2ty_Hipolyene-3040-B-M-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hipolyene 3040 B (M) is a Thermoplastic Polyolefin Elastomer (TPO (POE)) material filled with mineral. It is available in Africa & Middle East or Europe. Important attributes of Hipolyene 3040 B (M) are:
Typical application of Hipolyene 3040 B (M): Automotive |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (24 hr) | 1.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 23°C) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 22.1 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 95 | % | ASTM D638 |
| Flexural Modulus 3 | 834 | MPa | ASTM D790 |
| Flexural Strength 4 | 27.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 12 | J/m | ASTM D256 |
| Thermal | Nominal Value | ||
|---|---|---|---|
| Heat Stability - Long Term | Complies to auto OE requirement |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.4 mm/min |
| 4 . | 1.4 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polytech & Net XP 9200EN | Polytech & Net Gmbh | mLLDPE | Polytech & Net |
| Toraypef® 20015 AP16 | Toray Resin Company | Polyolefin, Unspecified | Toraypef® |
| ICORENE® N9503 | ICO Polymers EMEA, A Division of A. Schulman | SAN | ICORENE® |
| KEBAFORM® C 270.0 | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
| LEXAN™ LUX2289 resin | SABIC Innovative Plastics | PC | LEXAN™ |
