Order Products : sales@su-jiao.com

I. Stern IS-35955

Category:	HDPE , High Density Polyethylene
Manufacturer:	I. STERN & CO. INC.
Trademark:	I. Stern
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	VWGv7t_I-Stern-IS-35955.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

HDPE IS-35955 - Blow Molding Grade

Features

IS-35955 is designed for applications requiring excellent stiffness and stress crack resistance properties.

Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.

Applications

General purpose blow molding and sheet extrusion.

General Information
Features	General Purpose High ESCR (Stress Crack Resist.) High Stiffness
Uses	General Purpose
Agency Ratings	FDA 21 CFR 177.1520
Processing Method	Blow Molding Sheet Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.0345	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR)	0.35	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance
--	45.0	hr	ASTM D1693A
--	35.0	hr	ASTM D1693B

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	27.6	MPa	ASTM D638
Tensile Elongation (Break)	600	%	ASTM D638
Flexural Modulus	1380	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< 82.2	°C	ASTM D746

Resin Grade	Manufacturer	Category	Trademark
Sanren DJ210 (On-spec.)	SINOPEC Shanghai Petrochemical Co. Ltd.	LDPE	Sanren
REVOLVE® S-TeQ PA 12	Matrix Polymers	Nylon 12	REVOLVE®
Sumikon® FM-MK205	Sumitomo Bakelite Co., Ltd.	PPS	Sumikon®
Generic LCP - Glass\Mineral	Generic	LCP	Generic
LubriOne™ NN-000/10T-2S Black	PolyOne Corporation	Nylon 66	LubriOne™