Order Products : sales@su-jiao.com
Epoxies, Ect. 20-1634
| Category: | Silicone , Silicone |
| Manufacturer: | Epoxies, Etc. |
| Trademark: | Epoxies, Ect. |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VVqGcO_Epoxies-Ect-20-1634.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
20-1634 is a low density, two component silicone elastomer. The 20-1634 is less than half the weight of most commercially available potting and encapsulating compounds. 20-1634 utilizes an advanced micro balloon technology filler. This system is ideal for applications that require low weight, flexibility, high heat resistance, and excellent electrical insulation properties. 20-1634 is formulated without solvents or other toxic materials. It is therefore not regulated or considered hazardous for transportation. Features:
Benefits:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 2.0E-4 | cm/cm/°C | |
| Thermal Conductivity | 0.16 | W/m/K |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Mix Viscosity (25°C) | 30000 | cP |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Operating Temperature | -65.0 to 235 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | |||
| -- 1 | Clear/Transparent | ||
| -- 2 | White | ||
| Mix Ratio by Weight (PBW) | |||
| Part A | 100 | ||
| Part B | 10 | ||
| Density | |||
| 25°C 3 | 0.798 | g/cm³ | |
| 25°C 4 | 0.818 | g/cm³ | |
| 25°C 5 | 0.968 | g/cm³ | |
| Viscosity | |||
| 25°C 6 | 0.10 | Pa·s | |
| 25°C 7 | 45 | Pa·s | |
| Curing Time | |||
| 150°C | 0.33 | hr | |
| 100°C | 1.0 | hr | |
| 65°C | 2.0 to 4.0 | hr | |
| 25°C | 24 to 48 | hr | |
| Pot Life 8(25°C) | 60 | min | |
| Shelf Life | 6 | month |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 34 | ||
| Tensile Strength | 0.862 | MPa | |
| Tensile Elongation at Break | 230 | % | |
| Tear Strength | 2.89 | kN/m | |
| Electric Strength | 18 | kV/mm | |
| Relative Permittivity (100 Hz) | 3.10 | ||
| Volume Resistivity (25°C) | 1.0E+14 | ohms·cm |
| Note Message | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| 3 . | Part A |
| 4 . | Mixed |
| 5 . | Part B |
| 6 . | Part B |
| 7 . | Part A |
| 8 . | 100 grams |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E PVC GGT-2000 | S&E Specialty Polymers, LLC | PVC+PUR | S&E PVC |
| Sinvicomp SFW6500S | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| NYCOA Polyamide 2090 HS | Nycoa (Nylon Corporation of America) | Nylon+TPE | NYCOA Polyamide |
| Alathon® L5440AS | LyondellBasell Industries | HDPE | Alathon® |
| ALCOM® PA6 900/8 GF10 MR20 SV1285-04MCF | ALBIS PLASTIC GmbH | Nylon 6 | ALCOM® PA6 |
