Order Products : sales@su-jiao.com
Techsil® EP25485
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Techsil Limited |
| Trademark: | Techsil® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VUClZI_TechsilEP25485.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Techsil EP25485 is a low viscosity, thermally conductive flame retardant potting and encapsulating compound. The mixed system has a long usable life and may be hot or cold cured. The system exhibits a good surface finish, high electrical strength, excellent thermal conductivity and low cure shrinkage. EP25485 is compatible with most circuit board components and materials over a wide temperature range. Adhesion is excellent to most plastics and substrates. The combination of properties and the ease of use of the material will lend itself to a wide range of applications. The flame-retardants in EP25485 are of a non-halogen type and do not contain heavy metals. It is available in bulk, kits and twinpack form. The standard colour is Black but other colours are available on request. Features:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Contractility- Volume | 0.30 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Deflection Temperature | 80 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Loss Tangent 1 | 0.0450 | ||
| Operating Temperature | -40 - 150 | °C | |
| Peak Exotherm (25°C) | 50.0 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 3.5E-5 - 4.5E-5 | cm/cm/°C | |
| Thermal Conductivity | 1.2 | W/m/K |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | |||
| -- 2 | Black | ||
| -- 3 | Clear/Transparent | ||
| Mix Ratio by Weight (PBW) | |||
| Resin | 7.8 | ||
| Hardener | 1.0 | ||
| Mix Ratio by Volume (PBV) | |||
| Resin | 4.0 | ||
| Hardener | 1.0 | ||
| Density | |||
| -- 4 | 0.930 | g/cm³ | |
| -- 5 | 1.64 | g/cm³ | |
| -- 6 | 1.82 | g/cm³ | |
| Viscosity | |||
| 25°C 7 | 0.10 | Pa·s | |
| 25°C 8 | 3.0 | Pa·s | |
| 25°C 9 | 25 | Pa·s | |
| Curing Time | |||
| 80°C | 4.0 | hr | |
| 60°C | 6.0 | hr | |
| 25°C | 1.7E+2 | hr | |
| Gel Time (25°C) | 3.6E+2 | min | |
| Pot Life (25°C) | 120 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Water Absorption 10(20°C) | 0.50 | % | |
| Shore Hardness (Shore D) | 85 | ||
| Tensile Strength | 65.0 | MPa | |
| Tensile Elongation at Break | 1.0 - 3.0 | % | |
| Compression Strength | 80.0 | MPa | |
| Electric strength | 18 | kV/mm | |
| Relative Permittivity (50 Hz) | 4.99 | ||
| Volume Resistivity | 12 | ohms·cm |
| Note Message | |
|---|---|
| 1 . | 50 Hz |
| 2 . | Resin |
| 3 . | Hardener |
| 4 . | Hardener |
| 5 . | Mixed |
| 6 . | Resin |
| 7 . | Hardener |
| 8 . | Mixed |
| 9 . | Resin |
| 10 . | 30 days |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALFATER XL® A50I 4FC0000 | ALBIS PLASTIC GmbH | TPV | ALFATER XL® |
| Grilamid® 2D 25 W 20 X black | EMS-GRIVORY | Nylon 612 | Grilamid® |
| Pebax® 7233 SA 01 | Arkema | PEBA-Ether | Pebax® |
| Laticonther 62 GR/50-V0 | LATI S.p.A. | Nylon 6 | Laticonther |
| ESTOPLAST XU 230GY43 | Ester Industries Ltd. | Nylon 6 | ESTOPLAST XU |
