Order Products : sales@su-jiao.com
Hetron™ FR 650 T-20
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Ashland Performance Materials |
| Trademark: | Hetron™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VTssnT_Hetron-FR-650-T-20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HETRON FR 650 Series resins are flame retardant polyester resins. Composites made with HETRON FR 650 Series resins have been tested and have achieved a Class 1 Flame Spread per ASTM E-84 without addition of synergists such as antimony trioxide. HETRON FR 650 T-20 resin is a low viscosity, promoted, thixotropic, version. It exhibits excellent wet-out properties and low drainage when applied to vertical surfaces. This resin is formulated to contain 35% styrene. APPLICATIONS AND USE HETRON FR 650 Series resins, depending on the grade selected, can be used in hand lay-up, spray-up, filament winding and infused flame retardant applications. Markets include architectural, mass transit, passenger rail, electrical and mine ducting. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Solution Viscosity 1 | 450 | mPa·s | |
| Solids Content | 60 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Thixotropic Index | 2.80 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3520 | MPa | ASTM D638 |
| Tensile Strength | 77.2 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.7 | % | ASTM D638 |
| Flexural Modulus | 3520 | MPa | ASTM D790 |
| Flexural Strength | 123 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 68.9 | °C | ASTM D648 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Properties of cured casting at 25°C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Gel Time | 25 | min |
| Note Message | |
|---|---|
| 1 . | Brookfield #2 spindle @ 30 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® Fine Powders D40 NATURAL | Arkema | Nylon 11 | Rilsan® Fine Powders |
| UNITIKA Nylon 6 A1025GO | UNITIKA Plastics Division | Nylon 6 | UNITIKA Nylon 6 |
| Flontech® FT-EK10-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Forprene® 6NM001A80 | SO.F.TER. SPA | TPV | Forprene® |
| Stanyl® HFX82S | DSM Engineering Plastics | Nylon 46 | Stanyl® |
