Order Products : sales@su-jiao.com
INEOS HDPE T60-500-119
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VSyFQi_INEOS-HDPE-T60-500-119.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| T60-500-119 is a high density polyethylene homopolymer designed specifically for injection molding. This narrow molecular weight distribution resin is a product of Ineos USA, LLC's innovative technology. Parts fabricated from this material exhibit a glossy surface finish and good impact strength and rigidity. This material meets the Food and Drug Administration requirements of 21 CFR 177.1520(c) 3.2a. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.961 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.4 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | 4.00 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 32.1 | MPa | |
| Break | 21.8 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 8.0 | % | |
| Break | 1300 | % | |
| Flexural Modulus - Tangent | 1700 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 43 | J/m | ASTM D256 |
| Notched Izod Impact (Area) | 4.21 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 82.8 | °C | ASTM D648 |
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 129 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYTROPE® STR 1030EU-01 NATURAL | A. Schulman Inc. | Polyolefin, Enhanced TPO | POLYTROPE® |
| Propafilm™ MTX90 | Innovia Films Ltd. | PP Alloy | Propafilm™ |
| TRIBOCOMP® POM TS7 | EPIC Polymers | Acetal (POM) Copolymer | TRIBOCOMP® |
| ISPLEN® PM 275 AW | REPSOL | PP Copolymer | ISPLEN® |
| Luran® 33100 | Styrolution | SAN | Luran® |
