Order Products : sales@su-jiao.com
Generic Polyester, TS - Mineral
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VQTXka_Generic-Polyester-TS---Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Polyester, TS - Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.70 - 2.02 | g/cm³ | ASTM D792 |
| Apparent Density | 0.68 - 0.95 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow (23°C) | 0.075 - 0.54 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.10 - 0.16 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 51 - 110 | ASTM D785 | |
| Barcol Hardness | 9.1 - 50 | ASTM D2583 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 9560 - 20100 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 41.2 - 55.7 | MPa | ASTM D638 |
| 23°C | 34.5 - 83.3 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 0.60 - 1.1 | % | ASTM D638 |
| Flexural Modulus (23°C) | 9330 - 18300 | MPa | ASTM D790 |
| Flexural Strength | ASTM D790 | ||
| 23°C | 87.0 - 146 | MPa | ASTM D790 |
| Yield, 23°C | 68.9 - 114 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 136 - 180 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 24.3 - 28.1 | J/m | ASTM D256 |
| Notched Izod Impact (23°C) | 20 - 170 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 258 - 260 | °C | ASTM D648 |
| Continuous Use Temperature | 165 - 223 | °C | ASTM D794 |
| CLTE - Flow | 4.3E-5 - 8.6E-5 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 2.5E+14 - 6.6E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength (23°C) | 10 - 15 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C) | 4.20 - 6.15 | ASTM D150 | |
| Dissipation Factor (23°C) | 6.3E-3 - 0.028 | ASTM D150 | |
| Arc Resistance | 180 - 191 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) | 500 - 600 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 24 - 47 | % | ASTM D2863 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 96.5 - 153 | °C | |
| Mold Temperature | 157 - 173 | °C | |
| Injection Pressure | 8.40 - 8.60 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic Polyester, TS - MineralThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Cogegum® AFR/765 | Solvay Specialty Polymers | Polyolefin, Unspecified | Cogegum® |
| HiFill® PA6 0180 B | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| KRALASTIC® AN-491 R-1 | Nippon A&L Inc. | ABS | KRALASTIC® |
| Ipiranga GF 4960 | Braskem | HDPE | Ipiranga |
| Egyeuroptene HX 3305 U | Egyptian European Company | LLDPE | Egyeuroptene |
