Order Products : sales@su-jiao.com
TAISOX 7200
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation |
| Trademark: | TAISOX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VPW9it_TAISOX-7200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TAISOX 7200 is a high density polyethylene material,. This product is available in North America, Europe or Asia Pacific region. The processing method is injection molding. The main characteristics of TAISOX 7200 are: rapid prototyping cycle. Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 22 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 67 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 27.9 | MPa | ASTM D638 |
| Fracture | 14.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 700 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 93.2 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 125 | °C | ASTM D1525 |
| Melting Temperature | 133 | °C |
| Additional Information |
|---|
| Notched Izod Impact Strength, ASTM D256: 3.5 kg-cm/cm² |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 - 190 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4081 AR 10 TFE 20 | RTP Company | PPA | RTP |
| Witcobond® W-232 | Chemtura | PUR-Ester | Witcobond® |
| 4LEX® 10F10000 | 4Plas | PC | 4LEX® |
| AKROMID® B3 GM 15/15 black (1830) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| DISTRUMID 6 I | Distrupol | Nylon 6 | DISTRUMID |
