Order Products : sales@su-jiao.com
Westlake LDPE EC479AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VOpbp7_Westlake-LDPE-EC479AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WESTLAKE low-density polyethylene EC479 is recommended for use in the boardstock coating industry. This resin has low neck-in, good heat sealing properties, and good drawdown characteristics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 5.7 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 138 | MPa | ASTM D638 |
| Tensile Strength (Break) | 10.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 480 | % | ASTM D638 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 302 to 329 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TANEGUM ME/85 U2 SA | Crosspolimeri S.p.A. | PUR, Unspecified | TANEGUM |
| VITAMIDE® AR13 | A. Schulman Europe | Nylon 66 | VITAMIDE® |
| apilon 52® TL 62 | API SpA | TPU-Polyether | apilon 52® |
| Dryflex® 602750S | ELASTO | SEBS | Dryflex® |
| Geon™ Vinyl Rigid Extrusion 8700A | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
