Order Products : sales@su-jiao.com

AFFINITY™ EG 8100G

Category:	POP , Polyolefin Plastomer
Manufacturer:	The Dow Chemical Company
Trademark:	AFFINITY™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	VMsGiz_AFFINITY-EG-8100G.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
General purpose plastomer Excellent impact properties in blends with polypropylene and polyethylene Highly flexible with good elastic recovery High clarity Breathable (high O2 and CO2 transmission rates) Low temperature sealability Complies with U.S. FDA FCN 424 (See NOTES 1) Consult the regulations for complete details. (See NOTES 2) AFFINITY* EG 8100G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is a general purpose ethylene-octene copolymer exhibiting high flexibility and elasticity. AFFINITY EG 8100G can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance clarity, sealability and toughness of the structure. Complies with: CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS) EU No 10/2011 U.S. FDA FCN 424 Consult the regulations for complete details.

Message

General purpose plastomer

Excellent impact properties in blends with polypropylene and polyethylene

Highly flexible with good elastic recovery

High clarity

Breathable (high O2 and CO2 transmission rates)

Low temperature sealability

Complies with U.S. FDA FCN 424 (See NOTES 1)

Consult the regulations for complete details. (See NOTES 2)

AFFINITY* EG 8100G Polyolefin Plastomer (POP) is produced via INSITE* Technology. It is a general purpose ethylene-octene copolymer exhibiting high flexibility and elasticity. AFFINITY EG 8100G can be utilized in monolayer and coextruded films and in blends with other polyolefins to enhance clarity, sealability and toughness of the structure.

Complies with:
CANADIAN HPFB NO OBJECTION (WITH LIMITATIONS)

EU No 10/2011

U.S. FDA FCN 424

Consult the regulations for complete details.

General Information
Agency Ratings	DMF Unspecified Rating EU No 10/2011 FDA 21 CFR 176.170(c), Table 2 2 FDA FCN 424 JHOSPA Unspecified Rating
Forms	Pellets
Processing Method	Blown Film

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.870	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.0	g/10 min	ASTM D1238

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	46.0	°C	ASTM D1525
Melting Temperature (DSC)	55.0	°C	Internal Method

Resin Grade	Manufacturer	Category	Trademark
GAPEX® APP30GP10HB	Ferro Corporation	PP Homopolymer	GAPEX®
EPLAMID 6 GFR 10 NC	EPSAN Plastik SAN. ve TiC. A.S.	Nylon 6	EPLAMID 6
KUBE PIR 22414	KUBE Electronics AG	HDPE	KUBE PIR
INELEC PE	Infinity LTL Engineered Compounds	HDPE	INELEC
INFUSE™ 9500	The Dow Chemical Company	OBC	INFUSE™