Order Products : sales@su-jiao.com
RTP 202 A RC HS Black
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VMEQAm_RTP-202-A-RC-HS-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.23 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 6500 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 103 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.0 - 4.0 | % | ISO 527-2 |
| Flexural Modulus | 5100 | MPa | ISO 178 |
| Flexural Stress | 165 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 200 | °C | ISO 75-2/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 80.0 | °C | |
| Drying Time - Desiccant Dryer | 2.0 | hr | |
| Dew Point - Desiccant Dryer | -25.0 | °C | |
| Suggested Max Moisture | 0.20 | % | |
| Processing (Melt) Temp | 245 - 280 | °C | |
| Mold Temperature | 55.0 - 95.0 | °C | |
| Injection Pressure | 70.0 - 105 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® FC 20 | Versalis S.p.A. | LDPE | Riblene® |
| SCHULAMID® 6 GBF 3015 FR 2 | A. Schulman Europe | Nylon 6 | SCHULAMID® |
| Utomer UT1CP95AH | Shanghai Utomer Material Science Co., Ltd. | TPU-Polyester | Utomer |
| OP - Acetal 20GF | Oxford Polymers | Acetal (POM) Copolymer | OP - Acetal |
| Formolene® 6145O | Formosa Plastics Corporation, U.S.A. | PP Impact Copolymer | Formolene® |
