Order Products : sales@su-jiao.com

Osterlene® LD2019

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Osterman & Company
Trademark:	Osterlene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	VH6DmG_OsterleneLD2019.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

LD2019 is a homopolymer resin especially designed for industrial and consumer packaging, and liner and bag applications.

LD2019 has an excellent balance of processability, toughness and drawdown.

Osterlene LD2019 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.

Specific recommendations for processing LD2019 can only be made when the processing conditions, equipment and end use are known. Consult your Osterman sales

General Information
Features	Homopolymer Workability, good Good stripping Good toughness
Uses	Packaging Lining Bags Industrial application
Agency Ratings	FDA 21 CFR 177.1520

Physical	Nominal Value	Unit	Test Method
Density	0.919	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)	12.4	MPa	ASTM D638
Tensile Elongation (Break)	650	%	ASTM D638

Films	Nominal Value	Unit	Test Method
secant modulus			ASTM E111
1% secant, MD	183	MPa	ASTM E111
1% secant, TD	221	MPa	ASTM E111
Tensile Strength			ASTM D882
MD : Fracture	22.1	MPa	ASTM D882
TD : Fracture	15.9	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Fracture	200	%	ASTM D882
TD : Fracture	500	%	ASTM D882
Dart Drop Impact ¹	110	g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD	350	g	ASTM D1922
TD	70	g	ASTM D1922

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	85.0	°C	ASTM D1525

Note Message
1 .	F50

Resin Grade	Manufacturer	Category	Trademark
AKROMID® B3 GFM 10/20 1 grey (4561)	AKRO-PLASTIC GmbH	Nylon 6	AKROMID®
Boda BDF-H2751	Chenguang Fluoro & Silicone Elastomers Co., Ltd.	Fluorelastomer	Boda
Five Plus™ HPP20T	Noble Polymers	PP Homopolymer	Five Plus™
Edgetek™ X AS/018 NC704	PolyOne Corporation	ABS	Edgetek™
Honeywell PCTFE P800TR	Honeywell	PCTFE	Honeywell PCTFE